Aluminum Fence Installation

Aluminum Fence Install

Installing Aluminum Fence


Aluminum Fence Installers

Frequently Asked Questions

The recommended concrete mix for setting fence posts in Romeoville, IL, is typically a quick-setting concrete mix designed for post installations. Look for mixes labeled as fence post concrete that reach initial set in 20-40 minutes and achieve full strength in about 4 hours.
The amount of concrete needed per fence post will depend on the diameter and depth of the hole. As a general rule, you can use approximately half a bag (around 40 to 50 pounds) of quick-setting concrete mix for a standard 4x4 inch post set in a hole thats about 8 inches wide and 2 feet deep.
For many quick-setting concrete products used in fence installations, you can pour the dry mix directly into the hole around the post and then add water on top. However, always follow the manufacturers instructions on the packaging as some products may require pre-mixing.
It is generally advisable to wait at least 24 hours before attaching fence panels or placing any significant weight or stress on posts set with quick-setting concrete. This allows adequate time for the concrete to reach initial curing strength.
Yes, temperature and weather conditions affect how quickly concrete cures. Avoid installing your aluminum fence during extreme temperatures—both hot and cold—and during rainy days if possible. Concrete sets best at temperatures between 50°F and 90°F. In colder weather, consider using a special cold-weather concrete mix or adding accelerators to reduce cure time; conversely, use retarders in extremely hot conditions to prevent too fast drying which can weaken the final structure.